The ZA183, is part of the Halogen range of airfield lighting fixtures. This application is high intensity, Bi-directional Clear(white) / Red light / Yellow light source, and suitable for CAT I / II / III operations. With a lamp life exceeding 1,000 hrs at 6.6 amps the fitting is normally supplied by a 100W isolating transformer.
Inset Runway Edge Light | ZA183
Suggested Specification ZA183 – Inset Runway Edge L-850C
The high intensity inset light, shall comply with the requirements of FAA L-850C, specification AC 150/5345-46C. It will also comply with ICAO Annex 14, volume 1, para 5.3.13 for use as a runway centreline light in category I, II and III all weather operation airfield lighting systems. To achieve the above compliance’s, two lamps rated at 49W maximum shall be used with an expected lamp life of nominally 1500 hours at full brilliancy.
The optical system shall be pre-focused to simplify maintenance procedures and consist of a glass prism and a 6.6A cold reflector lamp. Prisms shall be accurately positioned and located within the body casting without the need for sealing compounds. Coloured beams shall be achieved by dichroic coating the prisms.
The light shall be manufactured predominantly from aluminum alloy material and shall be able to withstand all stresses imposed by impact, rollover and static loads of modern-day aircraft without causing damage to the light or to aircraft and vehicle tyres. The light shall not protrude above the surface of the pavement more than 12mm.
The light shall be capable of being stripped down to its component parts by means of a 5mm A/F Allen key only.
The light shall be mounted into 12″ or 15.5″ seating pot / base can by means of appropriate adaptors. The light cartridge shall have a commonality of parts with the touchdown zone, runway center line, and runway end versions to simplify and reduce airports spares holding.
An IMM shall be provided giving full installation, operation and maintenance instructions together with a detailed parts list.
Compliant to Latest Standards
- FAA AC 150/5345-46E
- ICAO Annex 14. Vol 1
- FAA AC 150/5345-46
- FAA Engineering Brief No. 67
- IEC 61827
- EASA
- Stannag 3316 (NATO)
- Other standards available on request
Product Data Sheet
Start your project with atg airports
ATG Airports is a leading global airfield lighting specialist offering design through to supply, installation or simply maintenance of an existing system. Get in touch to find out more about our range of products and services.
"*" indicates required fields